Ressurser ▼
Forum :: Off topic :: Hvordan gjøre s..
2.0 8v CalieMan - 08.09.2008 16:46:56
Karma: 0
Hvordan gjøre sonefri?

Noen som vet åssen jeg gjør Sony DAV-SC8 sonefri? Har prøvd å leite frem på forum å google,men finner ikke helt frem åssen man gjør det..=S

Svar:

s0nic - 16 år og 2 måneder siden
Karma: 0
Hvor kjøpte du den? Du kan levere den inn, så fikser butikken dette
pr0xZen - 16 år og 2 måneder siden
Karma: 0
Trenger en programmert service-remote.. enten det, eller programvaren som skal i den fjernkontrollen, og en Palm eller en laptom med IR elns...

Er no dritt med spillere som ikke bare like greit blir levert sonefrie, eller med en lapp i eska som viser 3-4 steg på fjernkontrollen for å gjøre jobben selv.
Dj_Devil - 16 år og 2 måneder siden
Karma: 0
Region code hack posted by psykix, October 29 2003:
I successfully hacked my DAV-SC8 using a variation on the DAV-S550 hack and a laptop with an IRDA port..

Details (cut and pasted and modified from the DAV-S550 thread, thanks to Stepht, Peter Buscher, Karsten Thomsen :--

1. Download Winsamp here: http://www.veg.nildram.co.uk/remote13.zip
This program will emulate an IR remote on your laptop

2. Extract the package onto a bootable DOS floppy disk. (this step is very important, I tried to use the software directly out of Windows before, but without success)

3. Download this IR code file and place it in the same directory as the package above. This file holds the five necessary IR codes converted to the format used by winsamp.exe. http://www.selen.org/files/REMOTE.TXT 4. Boot up your PC from the floppy disk and run winsamp.exe. If your IRDA port doesn't appear as COM2 you may override this by using an appropriate command line switch. For example, use COM1 by running 'winsamp C1'.

5. Press the 'r' key to load up the codes into winsamp.

6. Turn on the Player.

7. Hold down "EJECT" and "PREV" and and while keeping them pressed press VOLUME +, this should get you into the service menu.

8. Make sure your DVD player is in "Service IN" mode and your IRDA port is within range.

9. Run the IR codes from 1 to 5 by pressing Enter on each corresponding button.

10. Your DVD player should now display "DATA RESET".

11. Press the power button on the player remote.

12. Plug it out for 5-10 seconds.

13. Start it again, and play your region 1 ect. discs !!

for alle linker... her er linken til infoen....
http://www.videohelp.com/dvdhacks/sony-dav-sc8/3335

google...

is your best friend

Logg inn eller registrer deg for å delta i diskusjonen!